To use the Bissell Spot Clean Pro, follow these steps:
1. Prepare the machine: Fill the clean water tank with hot tap water and add the recommended Bissell cleaning solution according to the instructions. Ensure the dirty water tank is empty and properly attached to the machine.
2. Pre-treat stains: Before using the machine, pre-treat any stubborn stains or heavily soiled areas with a suitable stain remover or Bissell pre-treat formula. Allow it to sit for a few minutes to help break down the stains.
3. Power on the machine: Plug in the Bissell Spot Clean Pro and turn on the power switch located on the side or top of the machine. Wait for it to warm up for a minute before starting.
4. Choose the appropriate tool: The Spot Clean Pro comes with different attachments for different surfaces. Select the one that best suits your cleaning needs. For example, use the tough stain tool for carpeted areas or the stair tool for cleaning upholstery or stairs.
5. Begin cleaning: Press the trigger on the cleaning tool while moving it back and forth over the stained area. It’s recommended to work in small sections and make multiple passes over heavily soiled or stained areas for thorough cleaning.
6. Suction away dirt and moisture: Release the trigger and move the tool over the same area again without pressing the trigger to suction away any remaining dirt, cleaning solution, or moisture. Repeat as needed until the area appears clean.
7. Empty and rinse dirty water tank: Once finished, turn off the machine and unplug it from the power source. Remove the dirty water tank and empty its contents. Rinse the tank thoroughly with clean water and let it dry before reattaching it to the machine.
FAQs:
1. Can I use the Bissell Spot Clean Pro on all types of surfaces?
– Yes, the Spot Clean Pro can be used on various surfaces such as carpets, upholstery, stairs, rugs, and more. Just ensure you use the appropriate attachment for the specific surface.
2. How often do I need to refill the clean water tank?
– The frequency of refilling the clean water tank depends on the size of the area being cleaned and the level of soiling. As a general guideline, check the tank regularly and refill as necessary.
3. Can I use any cleaning solution with the Spot Clean Pro?
– It is recommended to use Bissell cleaning solutions specifically designed for the Spot Clean Pro. These solutions are formulated for optimal performance and compatibility with the machine.
4. How do I remove tough stains with the Spot Clean Pro?
– For tough stains, pre-treat the area with a stain remover or Bissell pre-treat formula before using the machine. This will help break down the stains and improve the cleaning effectiveness.
5. Can I clean the brushes and nozzles of the Spot Clean Pro?
– Yes, it is important to clean the brushes and nozzles after each use to maintain optimum performance. Follow the user manual instructions on how to remove and clean these parts.
6. Is the Spot Clean Pro suitable for pet messes?
– Yes, the Spot Clean Pro is designed to clean pet-related messes effectively. Use pet-specific cleaning solutions and attachments for the most efficient results.
7. Can I store the Spot Clean Pro without emptying the dirty water tank?
– It is recommended to always empty and rinse the dirty water tank after use to avoid any unpleasant odors or buildup. Store the machine with a clean and dry tank for hygienic purposes.
BOTTOM LINE:
The Bissell Spot Clean Pro is a versatile and effective spot cleaner that can simplify your cleaning tasks. By following the proper steps and using the appropriate attachments and cleaning solutions, you can easily remove stubborn stains and keep your carpets and upholstery looking fresh and clean.
