Cleaning your Shark vacuum is important to keep it performing at its best and to prolong its lifespan. Here are the steps to properly clean your Shark vacuum:
1. Unplug the vacuum: Before you start cleaning, ensure that the vacuum is unplugged from the power source to prevent any accidents.
2. Empty the dust cup: Most Shark vacuums come with a removable dust cup. Take out the dust cup and empty its contents into a trash bin. Shake off any excess debris if needed.
3. Clean the filters: Shark vacuums generally have two filters – a foam filter and a felt filter. Rinse these filters under cold water until the water runs clear. Make sure to squeeze out any excess water and allow the filters to air dry completely before reinserting them.
4. Check the brush roll: Remove any tangled hair or debris from the brush roll using scissors or a seam ripper. Regularly cleaning the brush roll prevents clogs and ensures optimal performance.
5. Wipe down the vacuum: Use a damp cloth or sponge to wipe down the exterior of the vacuum. Pay attention to areas that accumulate dirt or grime, such as the handle, buttons, and hose.
6. Clean the attachments: If your Shark vacuum comes with attachments, detach them and clean them separately. Rinse them with water and mild soap, then allow them to air dry completely before reattaching.
7. Regular maintenance: To keep your Shark vacuum functioning efficiently, it is recommended to clean the filters, dust cup, and brush roll after every few uses. This prevents dirt buildup and maintains strong suction power.
FAQs:
1. Can I wash the filters in the dishwasher?
No, it is not advisable to wash Shark vacuum filters in the dishwasher. Washing them under cold water is the best method to ensure their longevity.
2. How often should I clean the dust cup?
It is recommended to empty the dust cup whenever it reaches the maximum fill line or at least once every few uses, depending on how frequently you vacuum.
3. Should I use soap to clean the vacuum?
Soap or mild detergent can be used to clean the attachments, but it is generally not necessary to use soap when cleaning the vacuum itself. Water alone is sufficient.
4. Can I use a vacuum cleaner to clean my Shark filters?
No, using a vacuum cleaner to clean the filters may damage them. Rinse the filters under running water instead.
5. How do I remove the brush roll for cleaning?
Typically, a button or latch is provided to release the brush roll. Refer to your vacuum’s user manual for specific instructions on how to remove the brush roll for cleaning.
6. Do I need to oil the brush roll after cleaning?
No, most Shark vacuums have self-lubricating brush rolls, so there is no need to oil them after cleaning. Just make sure they are free of hair and debris before reattaching.
7. Can I use compressed air to clean my Shark vacuum?
Using compressed air to clean your Shark vacuum can be effective for removing stubborn debris. However, it is important to exercise caution and follow the manufacturer’s instructions to avoid damaging any components.
BOTTOM LINE: Regularly cleaning your Shark vacuum is essential for maintaining its performance and extending its durability. By following these steps and keeping up with routine maintenance, you can ensure optimal performance and longevity for your vacuum cleaner.
