To clean the filter of your Samsung washer, follow these steps:
1. Turn off the washer and unplug it from the power source for safety.
2. Locate the filter access panel on the front of the machine. It is usually located at the bottom near the floor.
3. Open the panel by pulling it towards you or flipping it down, depending on the model.
4. Place a towel or a shallow container underneath the filter to catch any water that may come out during the cleaning process.
5. Slowly twist the filter counterclockwise to remove it from the washer. Be careful not to force it as it may break.
6. Once the filter is removed, rinse it under running water to remove any debris or dirt buildup. You may use a soft brush to gently scrub away stubborn residue.
7. Inspect the filter for any damages such as cracks or tears. If you notice any damages, it is recommended to replace the filter with a new one.
8. After cleaning, reinsert the filter into its original position by twisting it clockwise until it locks securely.
9. Close the filter access panel and plug the washer back into the power source.
Frequently Asked Questions (FAQs):
1. How often should I clean the filter of my Samsung washer?
It is recommended to clean the filter at least once every two to three months or as needed depending on your usage and water quality.
2. Can I clean the filter without unplugging the washer?
No, it is essential to unplug the washer before cleaning the filter to ensure safety and prevent any electrical mishaps.
3. What should I do if the filter is stuck and won’t twist off?
If the filter is stuck, try using a pair of pliers with a firm grip to carefully twist it off. If it still doesn’t come off, contact Samsung customer support for further assistance.
4. Can I clean the filter with soap or detergent?
No, it is best to clean the filter using only water to avoid any residue or chemical buildup that may affect the washer’s performance.
5. What should I do if the filter is damaged and needs replacement?
If the filter is damaged, it is recommended to purchase a new one from an authorized Samsung dealer or service center.
6. Is it normal for some water to come out when removing the filter?
Yes, a small amount of water may come out when removing the filter, which is why it is important to have a towel or a container in place to catch it.
7. Can I use a pressure washer to clean the filter?
No, it is not advisable to use a pressure washer as it can damage the filter or push debris further into the machine. Stick to using water and a soft brush if necessary.
BOTTOM LINE:
Regularly cleaning the filter of your Samsung washer is crucial for maintaining its optimal performance. By following the steps mentioned above and addressing any concerns or damages promptly, you can ensure the longevity of your washer and prevent clogs or drainage issues.
