To clean the filter on a Samsung washer, follow these steps:
1. Turn off your washer and unplug it from the power source to ensure safety.
2. Locate the filter access panel on the front of your Samsung washer. It is usually located at the bottom right or left corner of the machine.
3. Open the filter access panel by pulling it gently towards you.
4. Place a towel or a shallow container beneath the filter access panel to catch any water that may spill out during the cleaning process.
5. Once the panel is open, you will see the filter. Twist it counterclockwise to remove it from its housing. Be prepared for water to drain out when you remove the filter.
6. Rinse the filter under running water to remove any debris or residue. Use a soft brush or sponge to gently scrub the filter if necessary.
7. Check the filter housing for any remaining debris and clean it if needed. Make sure there are no blockages or clogs.
8. After cleaning, insert the filter back into its housing and twist it clockwise until it is securely in place.
9. Close the filter access panel by pushing it back into position.
10. Plug in your washer and turn it on. Run a test cycle to ensure that the filter is clean and the machine is functioning properly.
FAQs:
1. How often should I clean the filter on my Samsung washer?
– It is recommended to clean the filter every one to three months, depending on the frequency of use and the type of laundry being washed.
2. Can I clean the filter without unplugging the washer?
– No, for safety reasons, it is important to turn off and unplug the washer before cleaning the filter.
3. What should I do if water spills out when removing the filter?
– Place a towel or a shallow container beneath the filter access panel to catch any water that may spill out during the cleaning process.
4. Can I use soap or detergent to clean the filter?
– It is best to rinse the filter under running water without using soap or detergent. If needed, a soft brush or sponge can be used to scrub the filter gently.
5. What should I do if the filter is damaged or broken?
– Contact Samsung customer support or a professional technician to replace the filter.
6. Are there any signs that indicate a dirty or clogged filter?
– Yes, some signs include longer washing cycles, poor water drainage, musty odors, or visible debris on clothes after washing.
7. Is it necessary to clean the filter if I use a washing machine cleaner regularly?
– Yes, even if you use a washing machine cleaner, it is still important to clean the filter separately, as it may accumulate lint, hair, and other debris over time.
BOTTOM LINE:
Cleaning the filter on your Samsung washer is a simple task that should be done regularly to maintain optimal performance. By following the steps mentioned above, you can ensure that your washer functions efficiently and that your clothes come out clean and fresh with each wash.
